Configuring System Information 211
Defining Communities
Access rights are managed by defining communities on the
SNMPv1, 2 Community
page. When
the community names are changed, access rights are also changed. SNMP Comminutes are defined
only for SNMP v1 and SNMP v2.
To open the
SNMPv1, 2 Community
page, click
System
→
SNMP
→
Communities
in the tree view.
Table 6-42. SNMP User CLI Commands
CLI Command Description
snmp-server user
username groupname
[remote
engineid-
strin
g][auth-md5
password
| auth-sha
password
| auth-md5-
key
md5-des-key
|
auth-sha-key
sha-des-
key
]
Configures a new SNMP V3 user.
show snmp users
[
username
]
Displays the configuration of users.
Console (config)
# snmp-server user John auth-md5 1234
Console (config)
# end
Console (config)# show snmp users
Name Group Name Auth Method Remote
------- ---------- ----------- ------
John user-group md5
To Next Page
Loading...
