210 Configuring System Information
www.dell.com | support.dell.com
Figure 6-61. SNMPv3 User Security Model Table
Deleting a User Security Model Table Entry
1
Open the
SNMPv3 User Security Model (USM)
page.
2
Click
Show All
.
The
SNMPv3 User Security Model Table
page opens.
3
Select an entry.
4
Check the
Remove
check box.
5
Click
Apply Changes
.
The entry is deleted, and the device is updated.
Defining SNMP Users Using CLI Commands
The following table summarizes the equivalent CLI commands for defining fields displayed in the
SNMPv3 User Security Model (USM)
page.
To Next Page
Loading...
