Dell PowerConnect 6024 - Page 199

Configuring System Information 209
SHA Key — Users are authenticated using the HMAC-SHA-96 authentication level. The user
should enter authentication and privacy keys.
Password (0-32 Characters) — Modifies the user defined password for the group. Passwords can
contain a maximum of 32 characters. Passwords are defined only if the authentication method is
MD5 or SHA Password.
Authentication Key(MD5-16; SHA-20 hexa chars) — Specify the authentication key. An
authentication key is defined only if the authentication method is MD5 Key or SHA Key.
Privacy Key (16 hexa chars) — Specify a password for authenticating and generating a DES key for
privacy. A privacy key is defined only if the authentication method is MD5 Key or SHA Key.
Remove — When checked, removes the specified user from the specified group.
Adding SNMPv3 Users to a Group
1 Open the SNMPv3 User Security Model (USM) page.
2 Click Add .
The
Add SNMPv3 User Name page opens:
Figure 6-60. Add SNMPv3 User Name
3
Define the relevant fields.
4 Click Apply Changes .
5 The user is added to the group, and the device is updated.
Viewing the User Security Model Table
1 Open the SNMPv3 User Security Model (USM) page.
2 Click Show All .
The
SNMPv3 User Security Model Table opens: