Dell PowerConnect 6024 - Defining Enable Password

188 Configuring System Information
www.dell.com | support.dell.com
The following is an example of the CLI commands:
Console (config-line)# password ****
Defining Enable Password
The Modify Enable Password page sets a local password to control access to different privilege
levels (1-15).
To open the
Modify Enable Password page, click System → Management Security → Enable
Password
in the tree view.
Figure 6-49. Modify Enable Password
The Modify Enable Password page contains the following fields:
Select Enable Access Level — Access level associated with the enable password. Possible field
values are 1-15.
Password — The current enable password.
Confirm Password — Confirms the new enable password. The password appears in the *****
format.
Defining a New Enable Password
1 Open the Modify Enable Password page .
2 Complete the fields in the dialog.