Dell PowerConnect 6024 - Page 177

Configuring System Information 187
Figure 6-48. Line Password
The Line Password page contains the following fields:
Line Password for Console/Telnet/Secure Telnet — The line password for accessing the device via
a console, Telnet, or Secure Telnet session.
Confirm Password — Confirms the new line password. The password appears in the ***** format.
Defining Line Passwords
1 Open the Line Password page .
2 Define the Line Password field for the type of session you use to connect to the device.
3 Click Apply Changes .
The line password for the type of session is defined, and the device is updated.
Assigning Line Passwords Using CLI Commands
The following table summarizes the equivalent CLI commands for defining line passwords.
Table 6-35. Line Password CLI Commands
CLI Command Description
password
password
[encrypted]
Specifies a password on a line.