Dell PowerConnect 6024 - Defining SNTP Interfaces

120 Configuring System Information
www.dell.com | support.dell.com
Defining SNTP Interfaces
The SNTP Broadcast Interface Table contains fields for setting SNTP on different interfaces.
To open the
SNTP Broadcast Interface Table , click System → SNTP → Interfaces Settings .
Figure 6-14. SNTP Broadcast Interface Table
The SNTP Broadcast Interface Table contains the following fields:
Interface — Displays a list of interfaces on which SNTP can be enabled.
Receive Servers Updates — Enables or disables receiving SNTP updates on the specific interface.
Remove — Select the check box to disable SNTP on the specific interface.
Enabling SNTP on an Interface
1 Open the SNTP Broadcast Interface Table .
2 Click Add.
The Add SNTP Interface page opens.
3 Define the relevant fields.
4 Click Apply Changes .
SNTP is enabled on the interface, and the device is updated.