48 Cable, Port, and Pinout Information
www.dell.com | support.dell.com
Figure 3-3. Serial Connector
Table 3-3 contains serial cable pin assignments.
Connecting the Switch to a Terminal
1
Connect the null modem (serial) cable to the terminal (console) ASCII DTE RS-232
connection.
2
Connect the interface cable to the switch’s serial port connection (see Figure 3-4).
Table 3-3. Serial Connector Pin Assignment
Signal Pin Management Console Port Signal
Unused 1 Unused
TXD 2 TXD
RXD 3 RXD
Unused 4 RXD
GND 5 GND
Unused 6 Unused
CTS 7 CTS
RTS 8 RTS
Unused 9 Unused
1
5
6
9
To Next Page
Loading...
