Configuring System Information 201
Defining SNMP Views
SNMP views provide or block access to device features or feature aspects. For example, a view can
be defined which states that SNMP group A has read-only access to routing, while SNMP group B
has read-write access to routing. Feature access is granted via the MIB name or MIB Object ID.
Use the
SNMP View Setting
page to define SNMP views.
To open the
SNMP View Setting
page, click
System
→
SNMP
→
View Settings
in the tree view.
Figure 6-53. SNMP View Setting
The
SNMP View Setting
page contains the following fields:
View Name
— Contains a list of user-defined views. A view name can contain a maximum of 30
alphanumeric characters.
New Object ID Subtree
— Specifies the device feature OID included or excluded in the SNMP
view.
View Type
— When checked, enables access to a selected feature or feature aspect in the SNMP
view.
Adding a View
1
Open the
SNMP View Setting
page
.
2
Click
Add
.
The
Add A View
page opens:
To Next Page
Loading...
