Dell PowerConnect 6024 - Page 192

202 Configuring System Information
www.dell.com | support.dell.com
Figure 6-54. Add A View
3
Define the relevant fields.
4 Click Apply Changes .
The SNMP view is added, and the device is updated.
Displaying the View Table
1 Open the SNMP View Setting page .
2 Click Show All .
The
View Table page opens:
Figure 6-55. View Table
Removing SNMP Views
1 Open the SNMP View Setting page .
2 Click Show All .
The
View Table page opens.
3 Select a SNMP view.
4 Check the Remove check box.