Dell PowerConnect 6024 - Setting the Management Station IP Address

Configuring the Switch 85
console(config-line)# login authentication default
console(config-line)# enable authentication default
console(config-line)# password tom
console(config-line)# exit
console(config)# line telnet
console(config-line)# login authentication default
console(config-line)# enable authentication default
console(config-line)# password bob
console(config-line)# exit
console(config)# line ssh
console(config-line)# login authentication default
console(config-line)# enable authentication default
console(config-line)# password jones
console(config-line)# exit
11 Save the running-config file to the startup-config file.
This ensures that the configuration just completed is the same if the device is rebooted.
console(config-line)# exit
console(config)# exit
console# copy running-config startup-config
The device is now configured and can be managed through the different options such as Telnet,
Web browser interface, and others.
Setting the Management Station IP Address
1 On the management station, click Start → Settings → Network and Dial-up Connections .
2 Right-click the network connection that is used for management, and select Properties .
The connection properties window is displayed.