Configuring Quality of Service 449
Configuring DSCP Rewriting Using the CLI Commands
The following is an example of the CLI commands to define DSCP mutation map:
console(config)# qos map dscp-mutation 1 2 4 5 6 to 63
Configuring Advanced QoS Mode
The
Advanced QoS Mode
page contains links to QoS pages for configuring advanced settings. To
open the page, click
Quality of Service
→
Advanced QoS Mode
in the tree view.
Defining QoS DSCP Mapping Settings
When traffic exceeds user-defined limits, use the
QoS DSCP Mapping
page to configure the
DSCP tag to use in place of the incoming DSCP tags. To open the page, click
Quality of Service
→
Advanced QoS Mode
→
DSCP Mapping
in the tree view.
Table 10-10. DSCP Rewriting CLI Commands
CLI Command Description
qos map dscp-
mutation
in-dscp
to
out-dscp
Modifies the DSCP to DSCP mutation map.
To Next Page
Loading...
