450 Configuring Quality of Service
www.dell.com | support.dell.com
Figure 10-12. QoS DSCP Mapping Page
DSCP In
— DSCP tag on an incoming packet.
Out of Profile DSCP
— Sets a new DSCP tag to incoming tag.
Configuring DSCP Mapping
1
Open the
QoS DSCP Mapping
page.
2
Select a value from the
Out of Profile
DSCP
drop-down menu.
This value replaces the
DSCP In
tag value.
3
Click
Apply Changes
.
DSCP mapping is configured, and the device is updated.
To Next Page
Loading...
