Dell PowerConnect 6024 - Page 190

200 Configuring System Information
www.dell.com | support.dell.com
The following is an example of CLI commands:
Console (config)# snmp-server enable traps
Console (config)# snmp-server trap authentication
Console (config)# end
Console# show snmp
Community-String Community-Access IP address
------------ ----------------- -----------------
public read only All
private read write 172.16.1.1
private read write 172.17.1.1
OOB management stations
Community-String Community-Access IP address
------------ ----------------- -----------------
private read write 176.16.8.9
Traps are enabled.
Authentication trap is enabled.
Trap-Rec-Address Trap-Rec-Community Version
192.122.173.42 public 2
OOB trap receivers
Trap-Rec-Address Trap-Rec-Community Version
176.16.8.9 public 2
System Contact: Robert
System Location: Marketing