Dell PowerConnect 6024 - Page 140

150 Configuring System Information
www.dell.com | support.dell.com
The Add DNS Server page contains the following fields:
DNS Server — Specifies the DNS server’s IP address.
DNS Server Currently Active — Indicates the currently active DNS server.
Set DNS Server Active — Select the check box to define the DNS server as the active DNS
server.
3 Define the relevant fields.
4 Click Apply Changes .
The new DNS server is defined, and the device is updated.
Displaying the DNS Servers Table
1 Open the Domain Naming System (DNS) page .
2 Click Show All.
The DNS Server Table page opens:
Figure 6-29. DNS Server Table
Removing DNS Servers
1 Open the Domain Naming System (DNS) page .
2 Click Show All.
3 The DNS Server Table page opens.
4 Select a DNS Server Table entry.
5 Select the Remove check box.
6 Click Apply Changes.
The selected DNS server is deleted, and the device is updated.