Dell PowerConnect 6024 - Page 149

Configuring System Information 159
Figure 6-36. Add ARP Entry Page
3
Select an interface and complete the fields in the page.
4 Click Apply Changes .
The ARP Table static entry is added, and the device is updated.
Modifying an ARP Table Entry
1 Open the ARP Settings page.
2 Select a table entry.
3 Modify the required fields for a given interface.
4 Click Apply Changes .
The
ARP Table static entry is modified, and the device is updated.
Deleting an ARP Table Entry
1 Open the ARP Settings page.
2 Click Show All to display the ARP Table page.
3 Select a table entry.
4 Check Remove .
5 Click Apply Changes .
The table entry is deleted, and the device is updated.