190 Configuring System Information
www.dell.com | support.dell.com
The
TACACS+ Settings
page contains both user-defined and the default TACACS+ settings for
the inband management port.
To open the
TACACS+ Settings
page, click
System
→
Management Security
→
TACACS+
in the
tree view.
Figure 6-50. TACACS+ Settings
The
TACACS+ Settings
page contains the following fields:
Host IP Address
— Specifies the TACACS+ Server IP address.
Priority (0-65535)
— Specifies the order in which the TACACS+ servers are used. The default is 0.
Source IP Address
— The device source IP address used for the TACACS+ session between the
device and the TACACS+ server.
Key String (0-128 Characters)
— Defines the authentication and encryption key for TACACS+
communications between the device and the TACACS+ server. This key must match the
encryption used on the TACACS+ server.
Authentication Port (0-65535)
— The port number through which the TACACS+ session occurs.
The default is port 49.
Timeout for Reply (1-30)
— The amount of time that passes before the connection between the
device and the TACACS+ server times out. The field range is 1-30 seconds.
To Next Page
Loading...
