Configuring System Information 227
Figure 6-71. File Upload to Server
The
File Upload to Server
page contains the following fields:
Firmware Upload
— Indicates that the firmware file is uploaded. If
Firmware Upload
is selected,
the
Configuration Upload
fields are grayed out.
Configuration Upload
— Indicates that the configuration file is uploaded. If
Configuration
Upload
is selected, the
Firmware Upload
fields are grayed out.
Software Image Upload TFTP Server IP Address
— TFTP server IP address to which the software
image is uploaded.
Software Image Upload Destination
— The Software Image file path to which the file is uploaded.
Software Image Upload via OOB
—Indicates that the software image is uploaded via the out-of-
band management port.
Configuration Upload TFTP Server IP Address
— TFTP server IP address to which the
configuration file is uploaded.
Configuration Upload Destination
— The configuration file path to which the file is uploaded.
Configuration Upload Transfer File Name
— The software file that is uploaded. Possible field
values are:
Running Configuration
— Uploads the running configuration file.
Startup Configuration
— Uploads the startup config files.
Backup Configuration
— Uploads the backup config files.
To Next Page
Loading...
