238 Configuring Switch Information
www.dell.com | support.dell.com
The following is an example of the CLI commands:
dot1x timeout tx-
period
seconds
Sets the number of seconds that the device waits
for a response to an EAP - request/identity frame,
from the client, before resending the request.
show dot1x [ethernet
interface
]
Displays 802.1X status for the
device
or for the
specified interface.
show dot1x users
[username
username
]
Displays 802.1X users for the
device
.
show dot1x
statistics ethernet
interface
Displays 802.1X statistics for the specified
interface.
Console# show dot1x
Port Admin Mode Oper Mode Reauth
Control
Reauth
Period
Username
---- ---------- ---------- ------- ------ --------
g11 Auto Authorized Ena 3600 Bob
g12 Auto Authorized Ena 3600 John
g13 Auto Unauthorized Ena 3600 Clark
g14 Force-auth Authorized Dis 3600 n/a
Table 7-1. Port Authentication CLI Commands
CLI Command Description
To Next Page
Loading...
