Dell PowerConnect 6024 - Page 238

248 Configuring Switch Information
www.dell.com | support.dell.com
Modifying an IP based ACE
NOTE: ACEs can be modified only when the ACL to which they belong is not bound to an interface.
1
Open the Add ACE to IP Based ACL page.
2 Click Show All to display all ACEs in the ACL.
3 Select an ACL in the ACL Name field.
4 Modify the fields as desired.
5 Click Apply Changes .
The IP-based ACE is modified, and the device is updated.
Adding New ACEs to an IP-Based ACL
1 Open the Add ACE to IP Based ACL page.
2 Select an ACL in the ACL Name field.
3 Define the fields in the dialog.
4 Click Apply Changes .
The ACE is assigned to the IP based ACL.
5 Click Apply Changes and fill in the new ACE’s parameters to additional ACEs to an existing
ACL
Reordering ACEs in an ACL
1 Open the Add ACE to IP Based ACL page, and select the ACL to be operated upon from the
ACL Name drop-down menu.
2 Click Show All .
The
ACEs Associated with IP-ACL page opens.
3 Enter a priority number that orders the ACE as desired.
4 Click Apply Changes .
The ACE is reordered and the device is updated.
Removing ACLs
1 Open the Add ACE to IP Based ACL page, and select the ACL to be operated upon from the
ACL Name drop-down menu.
2 Click Show All .
The
ACEs Associated with IP-ACL page opens.
3 Check the Remove ACL check box
4 Click Apply Changes .