268 Configuring Switch Information
www.dell.com | support.dell.com
Figure 7-16. Port Mirroring
The
Port Mirroring
page contains the following fields:
Destination Port
— Contains a list of port numbers from which port traffic may be copied.
Transmit Packets
— Specifies if packets are transmitted tagged or untagged from the destination
port.
Source Port
— Port number to which port traffic is mirrored.
Ty p e
— Specifies the type of traffic monitored. Possible field values are:
TX
— Monitors transmitted packets only.
RX
— Monitors received packets only.
TX and RX
— Monitors transmitted and received packets.
Status
— Indicates if the port is currently monitored (
Active
) or not monitored (
Not Ready
).
Remove
— When checked, removes the port mirroring session.
Adding a Port Mirroring Session
1
Open the
Port Mirroring
page.
2
Click
Add
to display the
Add Source Port
page.
3
Select the source port from the
Source Port
drop-down menu.
To Next Page
Loading...
