Configuring Switch Information 273
Figure 7-18. Dynamic Address Table
The
Dynamic Address Table
contains the following fields:
Address Aging (10-630)
— Specifies aging time in seconds before a dynamic MAC address is
erased. The default value is 300 seconds.
The Dynamic Address Table can be queried by:
Port
— Interface queried for an address.
MAC Address
— The MAC address queried for an address.
VLAN ID
— The VLAN number (to which the MAC address is attached) that is queried for
an address.
Address Table Sort Key
— Specifies if the Dynamic Address Table is sorted by address, VLAN or
interface.
Defining the Aging Time
1
Open the
Dynamic Address Table
page.
2
Define the
Address Aging
field.
3
Click
Apply Changes
.
The aging time is modified, and the device is updated.
Querying the Dynamic Address Table
1
Open the
Dynamic Address Table
page.
2
Define the parameter by which to query the
Dynamic Address Table
.
To Next Page
Loading...
