Dell PowerConnect 6024 - Page 299

Configuring Switch Information 309
Figure 7-33. GVRP Global Parameters Page
GVRP Global Status — Enables or disables GVRP on the device. GVRP is disabled by default.
Interface — The port or LAG for which GVRP is enabled.
GVRP State — Enables or disables GVRP on an interface.
Dynamic VLAN Creation — Enables or disables VLAN creation through GVRP.
GVRP Registration — Displays the GVRP Registration status.
Enabling GVRP On the Device
1 Open the GVRP Global Parameters page.
2 Select Enable in the GVRP Global Status field.
3 Click Apply Changes .
GVRP is enabled on the device.
Enabling VLAN Registration Through GVRP
1 Open the GVRP Global Parameters page.
2 Select Enable in the GVRP Global Status field for the desired interface.
3 Select Enable in the GVRP Registration field.
4 Click Apply Changes .
GVRP VLAN Registration is enabled on the port, and the device is updated.