Dell PowerConnect 6024 - Page 304

314 Configuring Switch Information
www.dell.com | support.dell.com
The LACP Parameters page contains sections for defining global parameters and port parameters.
LACP System Priority (1-65535) — Indicates the LACP priority value for global settings. The
default value is 1.
Select a Port — The port number to which timeout and priority values are assigned.
LACP Port Priority (1-65535) — LACP priority value for the port.
LACP Timeout — Administrative LACP timeout. Possible values are:
Short — Specifies a short timeout value.
Long — Specifies a long timeout value.
Defining Link Aggregation Global Parameters
1 Open the LACP Parameters page.
2 Complete the LACP System Priority and the LACP Timeout fields.
3 Click Apply Changes .
The parameters are defined, and the device is updated.
Defining Link Aggregation Port Parameters
1 Open the LACP Parameters page.
2 Scroll to the Port Parameters table.
3 Select the port for which you want to define parameters.
4 Define the LACP System Priority and the LACP Timeout fields.
5 Click Apply Changes .
The parameters are defined, and the device is updated.
Displaying the LACP Parameters Table
1 Open the LACP Parameters page.
2 Click Show All to display the LACP Parameters Table .
Configuring LACP Parameters Using CLI Commands
The following table summarizes the equivalent CLI commands for configuring LACP parameters
as displayed in the
Link Aggregation page.
Table 7-29. LACP Parameters CLI Commands
CLI Command Description
lacp system-priority
value
Configures the system priority.