Dell PowerConnect 6024 - Page 314

324 Configuring Switch Information
www.dell.com | support.dell.com
Figure 7-39. Bridge Multicast Forward All Page
VLAN ID — Identifies a packet VLAN and contains information about the multicast group
address.
Ports — Ports that can be added to a multicast service.
LAGs — LAGs that can be added to a multicast service.
The following table contains the settings for managing router and port settings.
Attaching a Port to a Multicast Router or Switch
1 Open Bridge Multicast Forward All page.
2 Define the VLAN ID field.
3 Select a port in the Ports table, and assign the port a value.
Table 7-34. Bridge Multicast Forward All Router/Port Control
Port Control Definition
D Attaches the port to the Multicast router or
switch as a dynamic port.
S Attaches the port to the Multicast router or
switch as a static port.
F Forbidden
Blank Indicates that the port is not attached to a
Multicast router or switch.