Configuring Routing 369
Displaying the All Neighbors Table
1
Open the
Neighbors Table
page.
2
Click
Show All
to display the
All Neighbors Table
.
Viewing the OSPF Neighbor Information Using CLI Commands
The following table contains the CLI commands for viewing the OSPF Neighbor Information
Table.
The following is an example of the CLI commands:
Console> show ip ospf neighbor
ID Pri State Address IP interface
---------------------------------------------------
192.168.1.11 1 FULL /DR 192.168.1.11192.168.1.1
192.168.1.12 2 FULL /DROTHER 192.168.1.12192.168.1.1
192.168.2.11 1 FULL /DR 192.168.2.11192.168.2.1
192.168.2.12 2 FULL /DROTHER 192.168.2.12192.168.2.1
Console> show ip ospf neighbor 192.168.1.1
Neighbor 192.168.1.11, Address 192.168.1.11
In the area 0.0.0.0
Neighbor priority is 1, State is FULL
Options 2
Neighbor 192.168.1.12, Address 192.168.1.12
In the area 0.0.0.0
Neighbor priority is 2, State is FULL
Options 2
Table 8-14. OSPF Neighbor CLI Commands
CLI Command Description
show ip ospf
neighbor
[
interface
]
Displays OSPF-neighbor information about a per-
interface basis.
To Next Page
Loading...
