Dell PowerConnect 6024 - Page 434

444 Configuring Quality of Service
www.dell.com | support.dell.com
Figure 10-9. UDP to Queue Page
Select UDP Port from List — Selects a known UDP port for mapping to a queue.
Insert UDP Port — Enables manually entering a UDP port for mapping to a queue.
Map to Queue — The queue to which the specified UDP port is mapped.
Mapping a Known UDP Port to a Queue
1 Open the UDP to Queue page.
2 Select the Select UDP Port from List option.
3 Select a UDP port.
4 Select a queue from the Map to Queue list.
5 Click Apply Changes .
The UDP port is mapped to the specified queue, and the device is updated.
Mapping an Unlisted UDP Port to a Queue
1 Open the UDP to Queue page.
2 Select the Insert UDP Port option.
3 Enter the UDP port number in the Insert UDP Port field.
4 Select a queue from the Map to Queue list.
5 Click Apply Changes .
The UDP port is mapped to the specified queue, and the device is updated.