Dell PowerConnect 6024 - Page 446

456 Configuring Quality of Service
www.dell.com | support.dell.com
Ingress Committed Burst Size (CBS) — CBS in bytes per second.
Exceed Action — Action assigned to incoming information exceeds the traffic limits. Possible
values are:
Drop — Packets exceeding the limits are dropped.
Remark DSCP — Packets exceeding the limits are forwarded with a flagged/remarked DSCP
value.
None — Packets exceeding the limits are forwarded.
Remove — When checked, removes the aggregate policer from the Aggregate Policer Table.
Adding an Aggregate Policer
1 Open the QoS Aggregate Policer page.
2 Click Add to display the Add Aggregate Policer page.
3 Complete the fields in the dialog, and click Apply Changes .
The aggregate policer is created, and the device is updated.
Deleting an Aggregate Policer
1 Open the QoS Aggregate Policer page.
2 Select an aggregate policer from the drop-down menu.
3 Check Remove and then click Apply Changes .
The aggregate policer is deleted, and the device is updated.
Editing an Aggregate Policer:
1 Open the QoS Aggregate Policer page.
2 Click Show All to display the Aggregate Policer Table page.
3 Edit the information in the table for the policers you want to edit.
4 Click Apply Changes .