Dell PowerConnect 6024 - Page 94

104 Configuring System Information
www.dell.com | support.dell.com
European — The device clock changes to DST at 1:00 am on the last Sunday in March and
reverts to standard time at 1:00 am on the last Sunday in October. This option applies to EU
members and other European countries using the EU standard.
Other — The device clock changes to DST according to a user-defined range of time.
Time Set Offset (1-1440) — For countries outside the USA and Europe, the difference between
Standard Time and DST can be set in minutes. The default time is 60 minutes.
From/To — Defines the date and time that DST begins/ends in countries outside the USA and
Europe. The date format is DD/MMM/YY and the time format is HH:MM.
Recurring — Click this check box to enable DST on the device based on a recurring time frame.
The possible field values are:
From/To — Defines the Day/Week/Month and time that DST begins/ends. The time format
is HH:MM.
Selecting a Clock Source
1 Open the Time Synchronization page.
2 Define the Clock Source field.
3 Click Apply Changes .
The Clock source is selected, and the device is updated.
Defining Local Clock Settings
1 Open the Time Synchronization page.
2 Define the fields in the Local Settings area.
3 Click Apply Changes .
The local clock settings are applied, and the device is updated.
Defining Daylight Savings Time
1 Open the Time Synchronization page.
2 Define the fields in the Daylight Saving or Reccuring area.
3 Click Apply Changes .
The Daylight Saving Time settings are applied, and the device is updated.