Dell PowerEdge C6620 - Optional OCP Card; Removing the OCP Filler

Figure 89. Installing the rubber tube cover
Next steps
Follow the procedures listed in After working inside your system.
Optional OCP card
Removing the OCP filler
Prerequisites
1. Follow the safety guidelines listed in Safety instructions.
2. Follow the procedure listed in Before working inside your system.
3. Remove the expansion card riser 1.
4. Remove the rubber tube cover. See remove the liquid cooling cold plate with leak sensor step 1 to remove the rubber tube
cover.
Steps
Hold and lift the OCP filler from the OCP slot on the chassis.
Installing and removing system components
113