Dell PowerEdge C6620 - Installing the M.2 SSD Module

Figure 56. Removing the M.2 SSD module from the M.2 riser
Next steps
Replace the M.2 SSD module.
Installing the M.2 SSD module
Prerequisites
1. Follow the safety guidelines listed in Safety instructions.
2. Follow the procedure listed in Before working inside your system.
Steps
1. Align the M.2 SSD module at an angle with the connector on the M.2 riser.
2. Insert the M.2 SSD module firmly until it is fully seated in the connector on the M.2 riser.
86
Installing and removing system components