Dell PowerEdge C6620 - Page 40

Table 36. Network Settings details (continued)
Option Description
UEFI HTTP Settings Enables you to control the configuration of the UEFI HTTP device.
HTTP Device n (n = 1 to 4) Enables or disables the device. When enabled, a UEFI HTTP boot option is
created for the device.
HTTP Device n Settings (n = 1 to 4) Enables you to control the configuration of the HTTP device.
UEFI iSCSI Settings Enables you to control the configuration of the iSCSI device.
iSCSI Initiator Name Specifies the name of the iSCSI initiator in IQN format.
iSCSI Device1 Enables or disables the iSCSI device. When disabled, a UEFI boot option
is created for the iSCSI device automatically. This is set to Disabled by
default.
iSCSI Device1 Settings Enables you to control the configuration of the iSCSI device.
UEFI NVMe-oF Settings Enables you to control the configuration of the NVMe-oF devices.
NVMe-oF Enables or disables the NVMe-oF feature. When enabled, it allows to
configure the host and target parameters needed for fabric connection.
This is set to Enabled by default.
NVMe-oF Host NQN This field specifies the name of the NVMe-oF host NQN. Allowed input is
in the following format: nqn.yyyy-mm.<Reserved Domain Name>:<Unique
String>. Leave it empty to use system generated value with following
format: nqn.1988-11.com.dell:<Model name>.<Model number>.<Service
Tag>. This is set to nqn.1988-11.com.dell:<model name>.<model
number>.<service tag> by default.
NVMe-oF Host Id This field specifies a 16 bytes value of the NVMe-oF host identifier
that uniquely identifies this host with the controller in the NVM
subsystem. Allowed input is a hexadecimal-encoded string in this format:
00112233-4455-6677-8899-aabbccddeeff. Leave it empty to use system
generated value. A value of all FF is not allowed. This is set to
FFFFFFFF-FFFF-FFFF-FFFF-FFFFFFFFFFFF by default.
Host Security Key Path This field specifies the Host security key path.
NVMe-oF SubSystem Settings (n = 1 to 4) This field controls the parameters for the NVMe-oF subsystem n
connections.
Table 37. TLS Authentication Configuration screen details
Option Description
TLS Authentication Mode View or modify the device's boot TLS Authentication Mode. This option is set to One
Way by default. None means the HTTP server and the client will not authenticate each
other for this boot.
Root Certificate Configuration Import, delete, or export the root certificate.
Table 38. NVMe-oF SubSystem Settings screen details
Option Description
NVMe-oF SubSystem n (n = 1 to 4) Enables or disables NVMe-oF SubSystem. This option is set to Disabled by
default.
NVMe-oF SubSystem n Settings (n = 1
to 4)
Enables you to control the configuration of the NVMe-oF SubSystem, if Enabled.
40 Pre-operating system management applications