Processor specifications
Table 14. PowerEdge R7625 processor specifications
Supported processor Number of processors supported
AMD EPYC 4
th
Generation 9004 Series processor Up to two
PSU specifications
The PowerEdge R7625 system supports up to two AC or DC power supply units (PSUs).
Table 15. PSU specifications
PSU Class Heat
dissipation
(maximum)
(BTU/hr)
Frequenc
y (Hz)
Voltage AC DC Current (A)
High line
wattage
Low line
wattage
800 W
Mixed
Mode
Platinum 3000 50/60 100-240 V AC 800 W 800 W N/A 9.2-4.7
N/A 3000
N/A
240 V DC N/A N/A 800 W 3.8
1100 W
Mixed
Mode
Titanium 4125 50/60 100-240 V AC 1100 W 1050 W N/A 12-6.3
N/A 4125
N/A
240 V DC N/A N/A 1100 W 5.2
1400 W
Mixed
Mode
Platinum 5250 50/60 100-240 V AC 1400 W 1050 W N/A 12-8
N/A 5250
N/A
240 V DC N/A N/A 1400 W 6.6
1800 W
Mixed
Mode
Titanium 6610 50/60 200-240 V AC 1800 W N/A N/A 10
N/A 6610
N/A
240 V DC N/A N/A 1800 W 8.2
2400 W
Mixed
Mode
Platinum 9000 50/60 100-240 V AC 2400 W 1400 W N/A 16-13.5
N/A 9000
N/A
240 V DC N/A N/A 2400 W 11.2
2800 W
Mixed
Mode
Titanium 10500 50/60 200-240 V AC 2800 W N/A N/A 15.6
N/A 10500
N/A
240 V DC N/A N/A 2800 W 13.6
1100 W DC N/A 4265 N/A -48—(-60) V DC N/A N/A 1100 W 27
NOTE: Heat dissipation is calculated using the PSU wattage rating.
NOTE: When selecting or upgrading the system configuration, to ensure optimum power utilization, verify the system
power consumption with the Enterprise Infrastructure Planning Tool available at Dell.com/calc.
NOTE: If a system with AC 1400W/1100W PSUs operates at low line 100-120 V AC, then the power rating per PSU is
derated to 1050W.
NOTE: If a system with AC 2400W PSUs operates at low line 100-120 V AC, then the power rating per PSU is derated to
1400W.
Figure 24. PSU power cords
26
Technical specifications
To Next Page
Loading...
