Dell PowerEdge R7625 - System Memory; System Memory Guidelines

Figure 109. Installing the Adapter PERC module
Next steps
1. Connect the cables to the Adapter PERC module and route the cables properly.
NOTE: Refer cable routing topic for more information.
2. Install the cooling fan cage assembly.
3. If removed, install the air shroud or install the GPU air shroud.
4. Install the drive backplane cover.
5. Install the expansion card riser.
6. Follow the procedure listed in After working inside your system.
System memory
System memory guidelines
The PowerEdge R7625 system supports DDR5 registered DIMMs (RDIMMs).
Your system memory is organized into twelve channels per processor (one memory sockets per channel),12 memory sockets per
processor and 24 memory sockets per system.
Installing and removing system components
141