Dell Precision R5500 - Page 63

3. Repeat steps 1 and 2 for the remaining memory modules.
4. Install the processor and heat sink.
5. Install the front chassis assembly.
6. Install the remote access host card.
7. Install the SAS controller card.
8. Install the video card.
9. Install the CMOS battery.
10. Install the center riser board.
11. Install the power distribution unit.
12. Install the card cages.
13. Install the fan bracket.
14. Install the system fans.
15. Install the control panel.
16. Install the power supply.
17. Install the SAS backplane.
18. Install the hard drive assembly.
19. Install the hard drive carrier.
20. Install the optical drive.
21. Install the cooling shroud.
22. Install the cover.
23. Install the front bezel.
24. Follow the procedures in After Working Inside Your Computer.
Related Links
Removing the Memory
63