Dell Precision R5500 - Plug and Play Configuration Error; Read Fault; Requested Sector Not Found; Reset Failed

Plug and play configuration error
Description The computer encountered a problem while trying to configure
one or more cards.
Read fault
Description The operating system cannot read from the floppy or hard drive,
the computer could not find a particular sector on the disk, or
the requested sector is defective.
Requested sector not found
Description The operating system cannot read from the floppy or hard drive,
the computer could not find a particular sector on the disk, or
the requested sector is defective.
Reset failed
Description The disk re-set operation failed.
Sector not found
Description The operating system cannot locate a sector on the floppy or
hard drive.
Seek error
Description The operating system cannot find a specific track on the floppy
disk or hard drive.
Shutdown failure
Description A chip on the system board might be malfunctioning.
94