General
• USB Device
Drives
Diskette Drive Determines how the BIOS configures floppy drives
• Disabled
• Enabled (default)
SATA Operation Configures the operating mode of the integrated hard-drive
controller.
• RAID Autodetect / AHCI
• RAID Autodetect / ATA
• RAID On (default)
SMART Reporting Controls if hard drive errors for integrated drives are reported
during start up.
Enable Smart Reporting — Disabled by default
Drives These fields let you enable or disable various drives in the
computer:
• SATA-0
• SATA-1
• SATA-2
• SATA-3
• SATA-4
• SATA-5
System Configuration
Integrated NICs Enables or disables the integrated network card. You can set the
integrated NIC to:
• Disable
• Enable (default)
• Enabled with PXE
USB Controller Enables or disables the integrated USB controller.
70