Security
Clear Intrusion Warning — Enabled by default
Options available are enabled when the check box is selected.
• Disable
• Enable
• On-Silent — Enabled by default (if chassis intrusion is
detected)
Power Management
AC Recovery Determines how the system responds when AC power is re-
applied after a power loss. You can set the AC Recovery to:
• Power Off (default)
• Power On
• Last State
Auto On Time Sets time to automatically turn on the computer. Time is kept in
standard 12-hour format (hour:minutes:seconds). Change the
startup time by typing the values in the time and AM/PM fields.
The options available are:
• Disable (default)
• Every Day
• Weekdays
NOTE: This feature does not work if you turn off your
computer using the switch on a power strip or surge
protector or if Auto Power is set to disabled.
Low Power Mode Determines how aggressive the computer is at conserving
power while it is shutdown or in Hibernate mode.
Enable Low Power Mode — Disabled by default
Remote Wake Up Determines if the system can be powered up remotely from
Suspend, Hibernate, or Off.
• Disable
• Enable
• Enable with Boot to NIC
74
To Next Page
Loading...
