Delta AH500 - Page 61

AH500 Programming Manual
2-42
Limited
to
Special auxiliary
relay
Refresh time
SM1132
SM1132 is ON when the trigger is enabled and there is an SMTP
server response timeout.
SM1133
SM1133 is ON when the trigger is enabled and there is an SMTP
server response error.
SM1134
SM1134 is ON when the trigger is enabled and the size of the
attachment exceeds the limit.
SM1135
SM1135 is ON when the trigger is enabled and the attachment is
not found.
SM1136
SM1136 is ON when the trigger of the PLC parameter is enabled.
SM1137
SM1137 is ON when the trigger of the PLC parameter is triggered.
SM1138
SM1138 is ON when the trigger is enabled and no mail has been
sent.
SM1139
SM1139 is ON when the trigger is enabled and the last mail has
been sent successfully.
SM1140
SM1140 is ON when the trigger is enabled and the last mail has
been sent in error.
SM1141
SM1141 is ON when the trigger is enabled and the mail has been
sent.
SM1142
SM1142 is ON when the trigger is enabled and there is an SMTP
server response timeout.
SM1143
SM1143 is ON when the trigger is enabled and there is an SMTP
server response error.
SM1144
SM1144 is ON when the trigger is enabled and the size of the
attachment exceeds the limit.
SM1145
SM1145 is ON when the trigger is enabled and the attachment is
not found.
SM1146
SM1146 is ON when the trigger of the PLC parameter is enabled.
SM1147
SM1147 is ON when the trigger of the PLC parameter is triggered.
SM1148
SM1148 is ON when the trigger is enabled and no mail has been
sent.
SM1149
SM1149 is ON when the trigger is enabled and the last mail has
been sent successfully.
SM1150
SM1150 is ON when the trigger is enabled and the last mail has
been sent in error.
SM1151
SM1151 is ON when the trigger is enabled and the mail has been
sent.
SM1152
SM1152 is ON when the trigger is enabled and there is an SMTP
server response timeout.
SM1153
SM1153 is ON when the trigger is enabled and there is an SMTP
server response error.
SM1154
SM1154 is ON when the trigger is enabled and the size of the
attachment exceeds the limit.
SM1155
SM1155 is ON when the trigger is enabled and the attachment is
not found.
SM1156
SM1156 is ON when the trigger of the PLC parameter is enabled.
SM1157
SM1157 is ON when the trigger of the PLC parameter is triggered.
SM1158
SM1158 is ON when the trigger is enabled and no mail has been
sent.
SM1159
SM1159 is ON when the trigger is enabled and the last mail has
been sent successfully.
SM1160
SM1160 is ON when the trigger is enabled and the last mail has
been sent in error.