Delta AH500 - Page 62

Chapter 2 Devices
2-43
Limited
to
Special auxiliary
relay
Refresh time
SM1161
SM1161 is ON when the trigger is enabled and the mail has been
sent.
SM1162
SM1162 is ON when the trigger is enabled and there is an SMTP
server response timeout.
SM1163
SM1163 is ON when the trigger is enabled and there is an SMTP
server response error.
SM1164
SM1164 is ON when the trigger is enabled and the size of the
attachment exceeds the limit.
SM1165
SM1165 is ON when the trigger is enabled and the attachment is
not found.
SM1166
SM1166 is ON when the trigger of the PLC parameter is enabled.
SM1167
SM1167 is ON when the trigger of the PLC parameter is triggered.
SM1168
SM1168 is ON when the trigger is enabled and no mail has been
sent.
SM1169
SM1169 is ON when the trigger is enabled and the last mail has
been sent successfully.
SM1170
SM1170 is ON when the trigger is enabled and the last mail has
been sent in error.
SM1171
SM1171 is ON when the trigger is enabled and the mail has been
sent.
SM1172
SM1172 is ON when the trigger is enabled and there is an SMTP
server response timeout.
SM1173
SM1173 is ON when the trigger is enabled and there is an SMTP
server response error.
SM1174
SM1174 is ON when the trigger is enabled and the size of the
attachment exceeds the limit.
SM1175
SM1175 is ON when the trigger is enabled and the attachment is
not found.
SM1176
SM1176 is ON when the trigger of the PLC parameter is enabled.
SM1177
SM1177 is ON when the trigger of the PLC parameter is triggered.
SM1178
SM1178 is ON when the trigger is enabled and no mail has been
sent.
SM1179
SM1179 is ON when the trigger is enabled and the last mail has
been sent successfully.
SM1180
SM1180 is ON when the trigger is enabled and the last mail has
been sent in error.
SM1181
SM1181 is ON when the trigger is enabled and the mail has been
sent.
SM1182
SM1182 is ON when the trigger is enabled and there is an SMTP
server response timeout.
SM1183
SM1183 is ON when the trigger is enabled and there is an SMTP
server response error.
SM1184
SM1184 is ON when the trigger is enabled and the size of the
attachment exceeds the limit.
SM1185
SM1185 is ON when the trigger is enabled and the attachment is
not found.
SM1186
SM1186 is ON when the trigger of the PLC parameter is enabled.
SM1187
SM1187 is ON when the trigger of the PLC parameter is triggered.
SM1188
SM1188 is ON when the trigger is enabled and no mail has been
sent.
SM1189
SM1189 is ON when the trigger is enabled and the last mail has
been sent successfully.