ASRTU-EC16AP1TA EtherCAT Remote Communication Module Operation Manual
1-2
This manual provides an introduction to product functions, specifications, installation, basic
operations and settings.
This product is an OPEN TYPE device and therefore should be installed in an enclosure free of
airborne dust, humidity, electric shock and vibration. The enclosure should prevent
non-maintenance staff from operating the device (e.g. key or specific tools are required for
operating the enclosure) in case that danger and damage on the device may occur.
Be sure to read the manual carefully and follow the instructions so as to avoid injuries to personnel
and damage to products.
1.1 Explanation of Symbols in This Manual
Precautions before operation
Before operation, please read relevant safety instructions carefully so as to prevent an injury to personnel and
damage to products
.
Indicates the highly potential hazards. Severe personal injury or even death
will result if you do not follow the instructions.
Indicates the potential hazards. Minor personal injury or even death may result if you
do not follow the instructions.
Indicates much attention should be paid. A bad accident can occur if you do not
follow the instructions.
1.2 Revision History
Version Revision Release Date
1
st
The first version was published. November 1, 2022
2
nd
The external output wiring figure was updated by changing
the max. output current from 0.1A to 0.5A in Section 4.4.2.
November 7, 2022
To Next Page
Loading...
