ASRTU-EC16AP1TA EtherCAT Remote Communication Module Operation Manual
B-6
The following is the normal screen of the online firmware upgrade.
Once the online firmware upgrade is complete, the progress bar will disappear, and then the
ASRTU-EC16AP1TA will automatically restart, and the current status will change to "Init".
Since the check box of "Automatic restart slaves" in the "EtherCAT_Master_SoftMotion" window has been
deselected, you can reset the AX-308E by using the "Reset warm" option on the "Online" menu of the
menu bar.
To Next Page
Loading...
