How to fix no test tones on Denon Stereo Receiver?
If no test tones are being produced by your Denon Stereo Receiver, it is possible that the surround mode is set to a mode other than Dolby Surround. To fix this, set the receiver to Dolby Surround.
What to do if Denon Stereo Receiver display is not lit and no sound is produced?
If the display is not lit and no sound is produced when the POWER switch is set to on for your Denon Stereo Receiver, it may be that the power supply cord is not plugged in securely. Check the insertion of the power supply cord plug.
General| Receiver type | Surround |
|---|---|
| Frequency range | 10 - 100000 Hz |
| Input sensitivity | 200 mV |
| Audio output channels | 7.1 channels |
| Signal-to-Noise Ratio (SNR) | 102 dB |
| Dynamic power per channel (4 Ohm) | 220 W |
| Dynamic power per channel (8 Ohm) | 150 W |
| Power output per channel (1KHz@6 Ohm) | 170 W |
| Power output per channel (20-20KHz@8 Ohm) | 130 W |
| HDMI in | 3 |
| Line-in | Yes |
| Composite video in | 7 |
| USB ports quantity | 1 |
| Digital audio coaxial in | 2 |
| Digital audio optical in | 5 |
| Headphone connectivity | 3.5 mm |
| Speakers connectivity type | RCA |
| AC input voltage | 120 V |
| AC input frequency | 60 Hz |
| Power consumption (standby) | 1 W |
| Power consumption (typical) | 570 W |
| 3D | - |
| Optical drive included | No |
| Product color | Silver |
| Audio decoders | DTS 96/24, DTS Neo:6, DTS-ES, Dolby Digital, Dolby Digital EX, Dolby Pro Logic IIx |
| Apple docking compatibility | iPod |
Weight and Dimensions| Depth | 429 mm |
|---|---|
| Width | 434 mm |
| Height | 171 mm |
| Weight | 18500 g |
To Next Page
