SERVICE MANUAL
Installation
(Rev. 0) RTG PLUS (120V)
6-1
6.
6.6.
6.
INSTALLATION
INSTALLATIONINSTALLATION
INSTALLATION
NOTE:
ROTOGRAPH PLUS is dispatched preassembled in groups.
The mechanical assembly consists exclusively in assembling these
groups together. Calibration of the ball bearing, brakes and eventual
tightening torques is factory preset before delivery; any intervention on
these parts, besides not being necessary, can cause malfunction.
Depending on the configuration of the unit, the following fixing methods
must be used:
Fix legs to floor Use wall bracket Fix column to floor
ST version with legs
•
ST version without
legs
• •
PAN (predisposed
CEPH) version with
legs
•
PAN (predisposed
CEPH) version
without legs
• •
PAN and CEPH
version with legs
•
PAN and CEPH
version without legs
• •
*
To Next Page
Loading...