DENT-X ROTOGRAPH PLUS - Non-Volatile Memory Reset

SERVICE MANUAL
Checkout and adjustments
(Rev. 0) RTG PLUS (120V)
7-7
7.2.3
7.2.37.2.3
7.2.3 Non
NonNon
Non-
--
-volatile memory reset
volatile memory resetvolatile memory reset
volatile memory reset
Press "R" (32). The system will emit a long beep. Press "R" again to
confirm the reset of the default parameters in the non-volatile memory.
After pressing "R" for the second time, wait a few seconds without
turning off the machine. This will automatically return to the normal
working condition.
NOTE:
If you press "R" once by mistake, you can exit the "Non-volatile memory
reset" function and return to the normal working condition by pressing
any key (except "R").
*