DETRUM GAVIN-6C - Page 24

GAVIN-6C Instruction Manual
- 22 -
rudder stick operation. The servo position can be set independently for a
maximum of 9 point positions.
Setting Method:
1. In the Model Parameter menu, press UP or DOWN key to select Stick Curve,
and then press ENT key to enter the AIL Curve setting interface.
AIL Curve
ENT
EPA: +100
EXP: 0
LEVEL
RESET
1： 0.0
2： 12.5
3： 25.0
4： 37.5
5： 50.0
6： 62.5
Continue to press ENT key to enter ELE Curve and RUD Curve setting
interface. The setting methods of elevator curve and rudder curve are the
same as aileron curve. Take the aileron curve setting method as an
example.
ELE Curve
ENT
EPA: +100
EXP: 0
LEVEL
RESET
1： 0.0
2： 12.5
3： 25.0
4： 37.5
5： 50.0
6： 62.5
RUD Curve
ENT
EPA: +100
EXP: 0
LEVEL
RESET
1： 0.0
2： 12.5
3： 25.0
4： 37.5
5： 50.0
6： 62.5
2. Press UP or DOWN key to select the setting item, and then press R/+ or L/-
key to set the value of the item.