DETRUM GAVIN-6C - Trainer Set [Trainer Set]

GAVIN-6C Instruction Manual
- 41 -
elevator D/R, rudder D/R, or other auxiliary functions.
Setting Method:
1. In the Model Set menu, press UP or DOWN key to select Func Set, and then
press ENT key to enter the setting interface.
Func Set
1/6
1.THR Hold：
2.Acro Fly：
3.AIL D/R：
HOLD
FMOD
OFF
The function items include THR Hold, ACR Fly, AIL D/R, ELE D/R, RUD D/R,
GEAR, and AUX1.
Values: OFF, HOLD, FMOD, GEAR, and FLAP. If the value of certain item is
set to OFF, the corresponding function will be disabled. HOLD, FMOD,
GEAR, and FLAP are the switches on the transmitter.
The default values of each function item are HOLD, FMOD, OFF, OFF, OFF,
GEAR, and FLAP.
Generally, the throttle hold switch is set to HOLD, acrobatic flight switch is set
to FMOD, landing gear switch is set to GEAR, flap switch is set to FLAP.
Users can choose the above switches for specified functions according to
individual habits.
 NOTE: There is no AUX1 function item for helicopter.
2. Press UP or DOWN key to select the function item, and then press R/+ or L/-
key to select the switch.
Trainer Set [Trainer Set]
This function allows two transmitters to be connected by a trainer cord to allow
dual control flight instruction. Then a skilled instructor can teach a student with fly
skills using this trainer system. The instructor transmitter should be set for trainer
operation. The trainer function makes it possible for the instructor to choose