DETRUM GAVIN-6C - System Set; Calibration [Calibration]

- 48 -
System Set
The System Set sets up functions of the transmitter, does not set up any model
data.
In the main screen, press ENT key to enter the main menu, press UP or DOWN
key to select System Set, and then press ENT key to enter the System Set
interface.
Language [Language]
It is used to set the language displayed on LCD, including Chinese and English.
Setting Method:
In the System Set menu, press UP or DOWN key to select Language, and then
press R/+ or L/- key to set the language.
Calibration [Calibration]
This function calibrates the neutral position of the stick and stick travel. Stick
calibration is required in the following conditions:
 Using the transmitter first time
 After changing the stick mode
 After upgrading the transmitter firmware
 When the positions of the sticks are inconsistent with the expected results
Setting Method:
1. In the System Set menu, press UP or DOWN key to select Calibration, and
then press ENT key to enter the setting interface.