DETRUM GAVIN-6C - Model Set; Select Model [Model]

- 39 -
Model Set
In the Model Set interface, you can edit a model or switch to another model, set
the model type, select the function for each hardware switch, set the trainer
function and fail safe function. GAVIN-6C can store a maximum of 30 aircraft
models.
In the main screen, press ENT key to enter the main menu, press UP or DOWN
key to select Model Set, and then press ENT key to enter the Model Set
interface.
Select Model [Model]
This is used to select a model, enables you to access any of the 30 aircraft
models in the model list.
Setting Method:
1. In the Model Set menu, press UP or DOWN key to select Model, and then
press ENT key to enter the setting interface.
2. Press UP or DOWN key to select the model, and then press ENT key to
confirm the selection.
Edit Model Name [Name]
The model name is used to display in the main screen. Users can edit the model
name. The model name is composed of a maximum of 9 characters which
contains upper- and lower-case letters, numbers (0~9), or special characters.
Setting Method:
1. In the Model Set menu, press UP or DOWN key to select Name, and then
press ENT key to enter the Edit model name interface.