DETRUM GAVIN-6C - Page 26

GAVIN-6C Instruction Manual
- 24 -
 NORM THR Curve (Normal Throttle Curve): It is used to adjust throttle
servo operation in response to throttle stick operation when the helicopter
is in NORM flight mode.
 ACR THR Curve (Acrobatic Throttle Curve): It is used to adjust throttle
servo operation in response to throttle stick operation when the helicopter
is in ACR flight mode.
 NOTE: The introductions for NORM and ACR, please see Flight Mode (Page
17).
In the Model Parameter menu, press UP or DOWN key to select THR
Curve, and then press ENT key to enter the NORM THR Curve setting
interface. Continue to press ENT key to enter Acro THR Curve setting
interface.
NORM THR Curve
ENT
EPA: +100
EXP: 0
LEVEL
RESET
1： 0.0
2： 12.5
3： 25.0
4： 37.5
5： 50.0
6： 62.5
ACR THR Curve
ENT
EPA: +100
EXP: 0
LEVEL
RESET
1： 0.0
2： 12.5
3： 25.0
4： 37.5
5： 50.0
6： 62.5
After setting the throttle curve of helicopter, you can select the normal or
acrobatic throttle curve by using acrobatic flight switch (the default is FMOD).
The setting method of throttle curve, please refer to Stick Curve [Stick Curve]
(Page 21).