Develop ineo 367 - Information Required to Register a Destination

3-60 ineo 367/287/227
Registering a destination
3
3.5
3.5.2 Information required to register a destination
The items to be entered or the number of screens required to register a destination vary depending on the
transmission type. This section describes specific information required to register a destination.
Tips
- Setting items that can generally be used with defaults are omitted in this table.
- The Hard Disk is optional in some areas. To register a User Box destination, the Hard Disk must be
installed in this machine. To register a fax destination, the Hard Disk and Fax Kit must be installed in
this machine.
Item Description
[E-Mail] [Name] Enter the name of the destination to be registered
as an address book.
[E-Mail Address] Enter the E-mail address used as the destination.
[User Box] [Name] Enter the name of the destination to be registered
as an address book.
[User Box] Select a User Box to be used as a destination.
[Fax] [Name] Enter the name of the destination to be registered
as an address book.
[Fax Number] Enter the fax number of the destination.
[PC (SMB)] [Name] Enter the name of the destination to be registered
as an address book.
[User ID] Enter the login name of the destination computer.
[Password] Enter the password required to log in to the com-
puter.
[Host Address] Enter the computer name or IP address.
[File Path] Enter the folder name to be used as the destina-
tion.
[FTP] [Name] Enter the name of the destination to be registered
as an address book.
[Host Address] Enter the address of the FTP server.
[File Path] Enter the directory to be used as the destination.
[User ID] Enter the user ID required to log in with FTP.
[Password] Enter the password required to log in with FTP.
[WebDAV] [Name] Enter the name of the destination to be registered
as an address book.
[User ID] Enter the user ID required to log in with WebDAV.
[Password] Enter the password required to log in with Web-
DAV.
[Host Address] Enter the address of the WebDAV server.
[File Path] Enter the directory to be used as the destination.